Rate this item
(0 votes)
This scenario is used when one would like to use digest authentication with Asterisk. You will have to use regular SIP account like User=878xxxxxxx and password=xxxxxxxx. In this scenarios Asterisk configuration should be a bit more complex. [general] register => 878xxxxx:passwordxxxx@sip_proxy/my_incoming_extension useragent => PBX[sip_proxy]type=friendauthuser=878xxxxxxxusername=878xxxxxxxfromuser=878xxxxxxxsecret=passwordxxxxhost=87.238.224.117qualify=yesinsecure=verycanreinvite=yes Note, that it is important to set useragent parameter in [general] section as shown above, because otherwise our system will try to apply ip authentication instead…
Rate this item
(2 votes)
Hello, To configure zoiper you need make the following :SETTING/ ACCOUNT/ ADD NEW ACCOUNTDo you already have an account? YESThen chosse manual.ACCOUNT NAME : Your sip user (8780xxxxxxx)USERNAME: Your sip user (8780xxxxxxx)PASSWORD: Your sip userHOST/DOMAIN : sip.hivoox.comAudio Codecs : G711u, G711a, G729, PCMU MCMA, ulaw, alaw
Rate this item
(0 votes)
With this tutorial you can configure the ZOIPER on your android device to make and receive calls Hivoox VoIP services. To use the tutorial you need to have first installed zoiper on your device and have your Hivoox phone line activated. You can download zoiper from GOOGLE PLAY. As soon as you have the Zoiper installed, you can follow the tutorial to set it up and start enjoying voip calls…
Rate this item
(0 votes)
This type of authentication is used when you have static ip address and this is default scheme. You need to give us your static ip address. sip.conf:[sip_proxy]type=peer host=87.238.224.117disallow=allallow=g729nat=nocontext=ringringusereqphone=yesoutboundproxy=87.238.224.117 Then you may use this configuration in your dialplan anyway you want, for example to send all calls in the context you may do the following: extensions.conf: [ringring]exten => _X., 1, Ringing()exten => _X., 2, Wait(1)exten => _X., 3, dial(SIP/${EXTEN}@sip_proxy)
Rate this item
(0 votes)
Thank you for contacting Hivoox Telecom, Support center. It's possible to block such calls by setting up some security parameters on the phone. Please browse to the web GUI of the phone and the following options to YES : - Check SIP user ID for Incoming INVITE - Accept Incoming SIP from Porxy Only And also kindly upgrade the phone to the latest firmware version, and let us know your…
Rate this item
(0 votes)
You must test each of these actions 1 by 1 and check each time if the problem is resolved: Check that you have correctly inserted the password, sip user and sip server correctly, without space before or after.Check that your router allows traffic on port 5060 or port 7060.Check that your firewall does not block traffic coming from your softphone.Generally you have in the sip / Domain / Host /…
Rate this item
(0 votes)
Please follow these steps: 1- Turn the router off.2- Turn off the adapter or the phone.3- There is an ethernet cable connected between the router and the adapter or the ip phone. Change the port where it is plugged into the router part.4- Turn the router back on and make sure that internet works on the computer.5- Verify that the ethernet cable is securely connected between the router and the…
Rate this item
(0 votes)
Verify that you have subscribed to a Hivoox offer that allows you to make calls and that you dial the number correctly in the format indicated by Hivoox: 00 + country code + phone number. You can also ask us to make configuration so that you call without the area code. For some countries, such as France, Spain, Portugal, Brasil, Belgium, Germany etc., this is already the case. Make sure…
Rate this item
(0 votes)
Log in to your PBS account - https://pbs.hivoox.com:8444/ 1- Then click on CENTREX IP / PHONE LINES2- And click on settings, in the sip user you need 8780xxxxxxxx.3- On the new windows that opens, click on MY PROFILE / SETTINGS4- And change the password. Do not forget to click on Save below so that the system takes into account your change. If you have multiple accounts, click on the cross…
Rate this item
(0 votes)
Make sure your headset is working properly.Make sure your headset is connected properly.Make audio tests directly on the softphone using the audio wizard.Make sure that only the audio codecs listed below are active. Change the position between the active codecs in the list.Codecs: G711u, G711a, G729, ulaw, alaw, PCMU, PCMA. Check that your firewall does not block traffic coming from your softphone.
Rate this item
(0 votes)
You can configure the voicemail by dialing *98 from the sip terminal and follow the instructions.If you have an audio file mp3 or wav, you can do this by following this tutorial: Enter to your pbs account: https://pbs.hivoox.com:8444 1- Click IP CENTREX2- On the left, click PHONE LINES3- Choose the sip account you wish to customize the answering machine and left click on the configuration key.4- A new window will…
Page 1 of 2

Our company

Founded by professionals with over 20 years of experience in the information technology and telecommunications, Hivoox Telecom is a voip service provider that offers services to businesses around the world.
keyboard_arrow_up